Відео

So my understanding is that PVC is old pipe and it cracks much more easily from cold or if any water gets left in it during a freeze, and also cracks more easily from tree roots. So I'm wondering why you think Polyethylene is old as my understanding is this is the newer pipe that sprinkler companies are using, and that they do not recommend pvc anymore. Can you extrapolate?

i watched other people youtube videos and tried their methods, but it didn't work, came across your video, i followed your steps and it works, i had to use a lighter because my ignition button isn't working properly.

@iscraper1 i have a question, what determines what side receives the tension spring? i see you did both ways, but is there a reason? Thank you!

Corrections: 1st thing you do is cut the goofy tab off so you can unscrew the top. Then take the over engineered spout to the bandsaw and cut all the crap of the end. Then place a section of tube on the end so you can pour fuel into a fuel tank without having to take Marshall arts lessons to make it easy. I usually just take the spout off and use a long funnel.

I see that costco shelf in the background :)

For waterproofing is silicon or epoxy better?

Do you think that this pvc and steel hose can you keep the water on all the time without busting the pvc or steel hose I figure you can with the steel hose but I am not sure about the pvc.

Thank you some landscaper was charging me $95 each time to come out and play with these settings

Thanks, our swamp cooler broke in the middle of summer and we didn’t want to have to pay to replace it

Thank you!! I could have not done this crate set up without your help!!👍👍👍

Great Video, thanks for sharing. I'm curious, are all Rain Bird sprinkler heads adjustable for the left edge by turning the shaft as you show?

Very helpful. Thank you!

Is there a reverse feature?

Thank you! Your video was great, to the point, and well done.

How u know ,in Chicago is hot weather like 90F chicago now is in 3, we have to put in 4 inches..

What if you don’t have that frame around the window to put the screen? How can I simply secure the frame to the outside window area?

Hello, I have an almost exact same fire pit by Red Valley Mountain in Canada , and for the life of me, I can't find a screw driver that fits the 4 m4 bolts to attach the hinges on the door! Help!!! :-)

What would cause water to shoot out under the green valve box when I turn on the stop & waste valve?

Great video! Thank you so much!

❤

So helpful.

i bought a brand new carburetor stihl and they come now with only 1 setting screw , still my hs45 fireup and dies no matter what setting i have on the screw ...i m bored

Reselling a home and the bathroom shower had a lot of hard water spots that wouldn’t come off with a magic Eraser and an hour of trying other methods. Tried this even though was skeptical of using so much dawn. It worked like a champ! Thank you so very much for making this video!!!!!

Is this for the Rolandstar bed frame?

It is possible to anchor the feet with silicone or something else so you don't have to drill into a tile floor and permanently put holes in it?

How about 8 years later and still getting value from this video. Thank you for making this video!

Thank you again. You reduce my stress a lot.

I see lots of cold air loss to the artic thru the cracks between metal box and drywall.

What is the ABC program?

I attached the female hose for continuous draining. But the bucket keeps on filling up and it’s not draining through the hose. What am I doing wrong?

Great video You saved me a lot of money. I had to build 2 screen as well. Thank you 👍🏼😎

Hvorfor ikke kaste det meste av hårene, i en søppelpose og så støvsuge det siste støvet?? Støvsugerposer koster masse penger og er søppel på en annen måte!?

Why did they design this dishwasher to be so difficult to clean? It was not easy, but it would have been impossible without this video.

🎉🎉🎉…THANK YOU for posting this!!!

Put the pull tabs on the inside of the house. Makes the burglars work a little harder.

Good video, but why do I need the galvanized pipe? Why not use a male treaded elbow up at the PVC and eliminate the galva nized pipe. Just screw the braided line directly onto the nippled up PVC elbow.

Thanks for sharing! It helped alot.

Thank you from Albuquerque!!

Ding dong

Ding dong

Using one inch screws on the striker in the frame side is unsound. One kick and the door is open.

what is the right side of tubing for the system and the amount of sprinkler that I can have by zone ?

hi! i was wondering if it's possible to select multiple items NOT in a row with this keyboard on an iPad because when i click cmd i can't select multiple items! i can select items IN a row when i click cmd+shift but i really really would like to select items NOT in a row and it's been bugging me :( i've been searching for answers on reddit but it seems like no one's having my issue :( thanks for your video though

Thank you. It took me under an hour to do this including going to Home Depot to buy the cartridge. You saved me a few hundred bucks.

It's 9 years after the fact, but I have to say that this is one of the most detailed DIY videos I've ever seen. I have a GE profile dishwasher with an inside that looks exactly like what you showed. Definitely a big help in figuring out how to take these items out, thanks!

SIr. you are the best. Thank you for the helpful video.

Thank you!

Excellent tutorial! You captured the "How It's Made" style and narration perfectly

Thank you. Very helpful as the manual is not very descriptive with directions.

Great video Really good information.